Invacare DLX Bedienungsanleitung

Owner's Operator And Maintenance ManualTracer SXTracer SX ReclinerTracer TitanTracer DLXDEALER: THIS MANUAL MUST BE GIVEN TO THE USEROF THE

10SAFETY&HANDLINGSAFETY/HANDLINGPosition the wheelchair as close as possible along sidethe seat to which you are transferring, with the frontcaste

11FOLDING AND UNFOLDING THEWHEELCHAIRWARNINGKeep hands and fingers clear of moving partsto avoid injury.Opening1. Open the wheelchair by grasping the

12SPECIFICATIONSSPECIFICATIONSSPECIFICATIONSTITAN TRACER SX24-1/2 or 26-1/2-inches30-1/4-inches16, 18 and 20-inches16-inchesAdult: 19-1/2-inchesHemi:

13SPECIFICATIONSSPECIFICATIONS* Weights will vary depending on how wheelchair is equipped.** With 24-inch Rear WheelsSPECIFICATIONS24-1/2 or 26-1/2-in

14SAFETY INSPECTION CHECK LISTSAFETYINSPECTIONSAFETY INSPECTION CHECKLISTNOTE: Every six (6) months take your wheelchair to a qualified technician for

15TROUBLESHOOTING/MAINTENANCEMAINTENANCEMAINTENANCEMAINTENANCE SAFETYPRECAUTIONSWARNINGAfter ANY adjustments, repair or service andBEFORE use, make su

16FRONT RIGGINGSPROCEDURE 1FRONTRIGGINGSThis Procedure includes the following:Swingaway Footrest Assembly InstallationSwingaway Footrest Height Adjust

17FRONT RIGGINGS PROCEDURE 1FRONTRIGGINGSELEVATING LEGREST ASSEMBLYINSTALLATION (FIGURE 4)6. To release the legrest, push the legrest releasehandle to

18PROCEDURE 2ARMSARMSThis Procedure Includes the Following:Adjusting Armrest Height - AdjustableHeight Arms OnlyRemoving or Replacing ArmrestUsing or

19REMOVING OR REPLACINGARMREST (FIGURE 2)WARNINGMake sure the armrest is securely locked BEFOREusing the wheelchair.1. Press in the armrest release bu

2WARNINGWARNINGSAVE THESE INSTRUCTIONSWARNINGDO NOT OPERATE THIS EQUIPMENT WITHOUT FIRSTREADING AND UNDERSTANDING THIS MANUAL. IF YOU AREUNABLE TO UND

20SEATANDBACKPROCEDURE 3 SEAT AND BACKThis Procedure Includes the Following:Assembling The Back to the WheelchairReplacing the Slip-on Back Upholstery

21FIGURE 3 - REPLACING SCREW-ON BACKUPHOLSTERYSEATANDBACKREPLACING SEAT UPHOLSTERY(FIGURE 4)1. Remove the eight (8) phillips screws and washersthat se

22SEATANDBACKb. Reinstall the button head screws and locknutsthat secure the pivot links to the crossbraces.TRACER DLX (BUILT BEFORE MARCH 13, 2000) -

23REARWHEELSREAR WHEELS PROCEDURE 4This Procedure Includes the Following:Removing/Installing the Rear WheelsAdjusting the Quick-Release AxleReplacing

24REARWHEELSPROCEDURE 4 REAR WHEELSDetentPinLocknutLockingPinsRearWheelHubQuick- ReleaseAxleAxle Spacer(ConventionalArms Only)WheelchairFrameFIGURE 3

25FRONT CASTERS PROCEDURE 5FRONTCASTERSThis Procedure Includes the Following:Installing/Replacing Six or Eight-inch FrontCasters and ForksReplacing/Re

26ANTI-TIPPERS/ANTI-TIPPERS/WHEEL LOCKSPROCEDURE 61. Depress the release buttons and insert the anti-tip-pers with the anti-tipper wheels pointing tow

27FIGURE 4 - WHEEL LOCK ADJUSTMENTWHEEL LOCK ADJUSTMENT(FIGURE 4)NOTE: Before adjusting or replacing the wheel lock as-semblies, ensure that the tires

282. Remove the front casters from the wheelchair. Referto FRONT CASTER MOUNTING ADJUSTMENTSin PROCEDURE 5 of this manual.3. Refer to the charts of

29PROCEDURE 7SEAT-TO-FLOOR HEIGHTSEAT-TO-FLOORHEIGHT8-INCH FORKMOUNTING POSITIONSTOPMIDDLEBOTTOMREAR WHEEL MOUNTING POSITION -TRACER SX RECLINER FRAM

3TABLE OF CONTENTSTABLE OF CONTENTSTABLEOFCONTENTSSPECIAL NOTES ... 4SAFETY SUMMARY ...

30RECLINERPROCEDURE 8 RECLINER1. Unfold wheelchair. Refer to SAFETY/HANDLINGsection of this manual.2. Attach spreader bar. Refer to STORING/REPLAC-

31REPLACING THE HEADRESTPILLOW (FIGURE 2)1. Unfasten straps of headrest pillow from behindheadrest upholstery and remove the existingheadrest pillow

32Detent PinSpreader BarFIGURE 4 - STORING/REPLACING THESPREADER BARRECLINERRECLINERREMOVING/INSTALLING THESPREADER BAR (FIGURE 4)WARNINGMake sure det

33PROCEDURE 8RECLINERREMOVING/INSTALLING THE REARWHEELS (FIGURE 5)Removing1. Note mounting position of EXISTING rear wheel.2. Remove the axle mounting

34OPTIONSPROCEDURE 9FIGURE 1 - INSTALLING THE AMPUTEE BRACKETREAR VIEW OFAMPUTEE BRACKETAxle Spacer Towards OUTSIDEof WheelchairRIGHTLEFTAxle Spacer T

35INSTALLING THE CRUTCH ANDCANE CARRIER (FIGURE 3)Safety and Maintenance1. Check base weekly to secure proper placement.2. Securely fasten strap while

36INSTALLING THE TELESCOPING I.V.RODNOTE: Flip-back style arms will not flip back when usedon the same side of the wheelchair as the telescopingI.V. r

37OPTIONSOPTIONS PROCEDURE 9Repositioning The Upper Attachment(FIGURE 3)1. With the Telescoping I.V. rod in the lowest position,align the hole of the

38NOTESNOTESNOTES

39LIMITED WARRANTYPLEASE NOTE: THE WARRANTY BELOW HAS BEEN DRAFTED TO COMPLY WITH FEDERAL LAW AP-PLICABLE TO PRODUCTS MANUFACTURED AFTER JULY 4, 1975.

4SPECIAL NOTESSPECIALNOTESWARNING/CAUTION notices as used in this manual apply to hazards or unsafe practices whichcould result in personal injury or

Invacare Corporation www.invacare.comUSAOne Invacare Way Invacare is a registered trademark of Invacare Corporation.Elyria, Ohio USA © 2000 Invacare

5OPERATING INFORMATIONWARNINGUnless otherwise noted, all service and adjustments should be performed while the wheelchair isunoccupied.After ANY adjus

6TRACER RECLINER ONLY:WARNINGALWAYS make sure that the wheelchair is stable BEFORE using the recliner.Anti-tippers MUST BE attached at all times.ALWAY

7SAFETY/HANDLINGSAFETY&HANDLINGSAFETY/HANDLING OF WHEELCHAIRSSafety and Handling of the wheelchair requires the closeattention of the wheelchair

8SAFETY/HANDLINGSAFETY&HANDLINGCENTER OFGRAVITYExample 46% 54% 103 lbs. 130 lbs.UNOCCUPIED OCCUPIEDFUNCTIONAL REACH FRO

9SAFETY/HANDLINGSAFETY&HANDLINGTIPPINGWARNINGDO NOT tip the wheelchair without assistance.When tipping the wheelchair, an assistant should graspth