Invacare 9000 XDT Bedienungsanleitung PDF herunterladen

DISASSEMBLING THE EXISTING

FORK/STEM ASSEMBLY (FIGURE 1)

1. Remove and discard the dust cover.

2. Remove and discard the locknut that secures the fork

to the caster headtube.

3. Drop the front caster and fork out of the caster

headtube.

4. Remove the hex screw, washers and locknut that se-

cures the front caster to the fork. Discard the fork.

NOTE: Front casters will be assembled to NEW fork.

5. Disassemble the existing caster headtube assembly.

Refer to DISASSEMBLING THE EXISTING CASTER

HEADTUBE ASSEMBLY in this instruction sheet.

SAFETY SUMMARY

The following recommendations are made for the

safe and proper installation and use of the 9000

XDT Tall Fork/Stem Conversion Kit:

GENERAL WARNING

DO NOT assemble or use this equipment

without first reading and understanding this instruc-

tion sheet. If you are unable to understand the Warn-

ings, Cautions or Instructions, contact a healthcare

professional, dealer or technical personnel if appli-

cable before attempting to install this equipment -

otherwise, injury or damage may occur.

INSTALLATION WARNING

After ANY adjustments, repair or service and BE-

FORE use, make sure that all attaching hardware is

tightened securely.

All Kits Include the Following:

Description Quantity

Flanged Bearing 2

Dust Cover 2

Locknut 2

Fork Assembly 2

Bottom Sleeve With Bearing 2

NOTE: This instruction sheet pertains to the following Kits:

1070843 (chrome), for wheelchairs built before 10/97, and

Kit No. 1075042 (chrome), for wheelchairs built after 10/97.

NOTE: Check all parts for shipping damage. If damage is

found, DO NOT use. Contact Carrier/Invacare for further

instructions.

FIGURE 1 - DISASSEMBLING THE EXISTING

FORK/STEM ASSEMBLY

Locknut

Dust Cover

Front Caster

and Fork

Caster Headtube

Hex Screw,

Washers and

Locknut

DISASSEMBLING THE EXISTING

CASTER HEADTUBE ASSEMBLY

(FIGURE 2)

NOTE: There are two (2) different bottom bearing assem-

blies. Refer to FIGURE 2 to determine the proper bearing.

1. Place a punch through the opening in the

BOTTOM flanged bearing or assembly housing of

the caster headtube and position it against the side of

the TOP flanged bearing.

2. Using a rubber mallet, gently tap the punch while mov-

ing it from side-to-side until the TOP flanged bearing

is free from the caster headtube. Discard the TOP

flanged bearing.

3. Place a punch through the opening in the caster head

tube and and position it against the side of the BOT-

TOM flanged bearing or assembly housing.

4. Using a rubber mallet, gently tap the punch while mov-

ing t from side-to-side until the BOTTOM flanged bear-

ing or assembly housing is free from the caster

headtube.

5. Repeat STEPS 1 through 4 for the opposite caster

headtube bearings.

6. Assemble the tall fork/stem assembly. Refer to AS-

SEMBLING THE TALL FORK/STEM ASSEMBLY

in this instruction sheet.

9000 XDT TALL FORK/STEM CONVERSION KIT

Assembly, Installation and Operating Instructions

Kit Nos. 1070843 and 1075042

1 2 3 4

Inhaltsverzeichnis

Seite 1 - FORK/STEM ASSEMBLY

DISASSEMBLING THE EXISTINGFORK/STEM ASSEMBLY (FIGURE 1)1. Remove and discard the dust cover.2. Remove and discard the locknut that secures the forkto

Seite 2 - STEM ASSEMBLY (FIGURE 3)

2CAUTIONAs with any vehicle, the wheels and tires should bechecked periodically for cracks and wear, andshould be replaced.REINSTALLING FRONT CASTERS(

Seite 3 - WHEELS (FIGURE 5)

3LocknutForkC. Let the casters drop to the bottom of the arc(the wheels should swing once to one-side, thenimmediately rest in a straight downward pos

Seite 4 - ADJUSTING THE PATIENT

Wheel LockHandleBolt and LocknutMountingPositionsWheelLockShoe/ShoeExtension5/32 and5/16-inchesRearWheelFIGURE 7 - ADJUSTING THE PATIENTOPERATED WHEEL

Kommentare zu diesen Handbüchern

Keine Kommentare

Invacare 9000 XDT Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kommunikation Invacare 9000 XDT herunter. Invacare 9000 XDT User Manual Benutzerhandbuch

Inhaltsverzeichnis

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kommunikation Invacare 9000 XDT