Invacare JYMNI 9000 Bedienungsanleitung PDF herunterladen

Part No. 1058751 1 9000 Series and Jymni Anti-tippers

SAFETY SUMMARY

To ensure the safe installation and use of the Anti-tippers, these instructions

MUST be followed:

WARNING

Do not operate this equipment without first reading and understanding this

instruction sheet and the owner's manual, part number 1056953, for the

9000 series wheelchairs or the owner's manual, part number 1100868, for

Jymni wheelchairs. If you are unable to understand the warnings, cautions,

and instructions, contact a healthcare professional, dealer or a qualified

technician before attempting to use this equipment - otherwise injury or

damage may result.

Anti-tippers are specific to the different seat-to-floor angles and/or seat-to-floor

heights. Refer to the chart in this instruction sheet for correct usage and

adjustment. If these requirements CANNOT be achieved, DO NOT use the

wheelchair. Contact a qualified technician. If changing the seat-to-floor height

with or without a change to seat-to-floor angle, the correct anti-tippers MUST be

used to maintain a 1-1/2 to 2-inch ground clearance.

9000 WHEELCHAIRS WITH A SEAT-TO-FLOOR ANGLE OF 0°

OR 3° AND

JYMNI NON-RECLINERS ONLY - If so equipped, anti-tippers MUST be

attached at all times. Inasmuch as the anti-tippers are an option for 0°

or 3°

this wheelchair (You may order with or without the anti-tippers), Invacare

strongly recommends ordering the anti-tippers as a safeguard for the wheelchair

user.

9000 WHEELCHAIRS WITH A SEAT-TO-FLOOR ANGLE OF 6° ONLY - If

changing the seat-to-floor angle to 6°, anti-tippers MUST BE ORDERED AND

INSTALLED.

JYMNI RECLINERS AND JYMNI WHEELCHAIRS WITH 1-INCH

FORWARD REAR WHEEL POSITIONERS ONLY - Anti-tippers MUST

be attached at all times.

Anti-tippers MUST be fully engaged and spring buttons fully protruding

out of adjustment holes, BEFORE using the wheelchair.

Ensure both anti-tippers are adjusted to the same mounting hole.

Anti-tipper kits include the following parts:

Description Quantity Description Quantity

Anti-tipper 2 Anti-rattle 2

9000 Series and Jymni Anti-tippers

Assembly, Installation and Operating Instructions

Adjustable Anti-tipper Kit Nos. 1058752, 1058836, 1064520 and 1101960

Non-adjustable Anti-tipper Kit Nos. 1113764, 1113765 and 1113766

NOTE: Check all parts for shipping damage before using. In case of damage, DO NOT use.

Contact the dealer/carrier for further instructions.

SAVE THESE INSTRUCTIONS

1 2 3 4

Inhaltsverzeichnis

Seite 1 - SAFETY SUMMARY

Part No. 1058751 1 9000 Series and Jymni Anti-tippersSAFETY SUMMARYTo ensure the safe installation and use of the Anti-tippers, these instructionsMUS

Seite 2

9000 Series and Jymni Anti-tippers 2 Part No. 1058751INSTALLING ANTI-TIPPERS (FIGURE 1)1. Remove plug button (not shown) from endof rear frame tubing

Seite 3

Part No. 1058751 3 9000 Series and Jymni Anti-tippers9000 SERIES ANTI-TIPPER CHARTS (FIGURE 3)NOTE: Refer to the following charts to ensure the corre

Seite 4 - JYMNI ANTI-TIPPER CHART

Invacare Corporation www.invacare.comUSA CanadaOne Invacare Way 570 Matheson Blvd E Unit 8 Invacare is a registered trademark ofElyria, Ohio USA Miss