Invacare 1114831 Bedienungsanleitung PDF herunterladen

Part No. 1114831 1 Bolt-In-Place/Spring Button

Front Rigging Kit

Bolt-In-Place/Spring Button Front Rigging Kit

Assembly and Installation Instructions

Kits No. 1110266 and 1121271

SAVE THESE INSTRUCTIONS

NOTE: Check ALL parts for shipping damage. In case of shipping damage, DO NOT use. Contact

Carrier/Dealer for further instruction.

SAFETY SUMMARY

To ensure the safe installation of the Bolt-In-Place/Spring Button Front Rigging

Kit, these instructions MUST be followed:

WARNING

DO NOT install or use this equipment without first reading and understanding

these instructions and the Owner’s Manual supplied with the wheelchair. If you

are unable to understand the Warnings, Cautions or Instructions, contact a

healthcare professional, dealer or technical personnel before attempting to

install this equipment - otherwise, injury or damage may occur.

INSTALLATION WARNING

After ANY adjustments, repair or service and before use, make sure all attaching

hardware is tightened securely - otherwise injury or damage may occur.

Bolt-In-Place Front Rigging Kit 1110266 contains the following items:

DESCRIPTION QUANTITY

Riv Nut 2

Button Head Screw 2

1/8-inch Hex key 1

Spring Buton Front Rigging kit 1112127 contains the following items:

DESCRIPTION QUANTITY

Spring buttons 4

INSTALLING THE BOLT-IN-PLACE FOOTPLATE KIT

(FIGURE 1)

NOTE: This kit mounts the footplate assembly to the front rigging support so that tools are required

to remove or adjust the footrest assembly.

1. Remove the front rigging from the wheelchair. Refer to the wheelchair owner’s

manual shipped with wheelchair.

2. Pull up on the cam lock lever to unlock the cam.

NOTE: The elevating legrest has two (2) sets of release buttons, one (1) set above the other. Each

set will be visible one at a time allowing finer footplate height adjustment.

3. Push IN and hold the release button as shown in DETAIL “A” of FIGURE 1.

4. Rotate the lower footplate assembly 1/4 turn.

1 2 3 4 5 6 7 8

Inhaltsverzeichnis

Seite 1 - (FIGURE 1)

Part No. 1114831 1 Bolt-In-Place/Spring ButtonFront Rigging KitBolt-In-Place/Spring Button Front Rigging Kit Assembly and Installation InstructionsKit

Seite 2 - Front Rigging Kit

Bolt-In-Place/Spring Button 2 Part No. 1114831Front Rigging Kit5. Remove the lower footplate assembly from the front rigging support.6. Squeeze and pu

Seite 3 - 3 Bolt-In-Place/Spring Button

Part No. 1114831 3 Bolt-In-Place/Spring ButtonFront Rigging KitBOLT-IN-PLACE HEIGHT ADJUSTMENT (FIGURE 1)NOTE: This procedure applies to the swingaway

Seite 4 - KIT (FIGURE 2)

Bolt-In-Place/Spring Button 4 Part No. 1114831Front Rigging KitINSTALLING THE SPRING BUTTON FRONT RIGGINGKIT (FIGURE 2)NOTE: This kit allows tool-less

Seite 5

Part No. 1114831 5 Bolt-In-Place/Spring ButtonFront Rigging KitNOTE: Swingawayfootrests shown.FootplateAssemblyFront Rigging SupportCamLockLeverRiv Nu

Seite 6 - NOTESNOTES

Bolt-In-Place/Spring Button 6 Part No. 1114831Front Rigging KitNOTESNOTESNOTESNOTESNOTES

Seite 7

Part No. 1114831 7 Bolt-In-Place/Spring ButtonFront Rigging KitNOTESNOTESNOTESNOTESNOTES

Seite 8 - MADE IN MEXICO

Invacare Corporation www.invacare.comUSAOne Invacare Way Invacare is a registered trademark ofElyria, Ohio USA Invacare Corporation.44036-2125 Yes, y

Verwandte Modelle: 1110266 | 1121271 |

Kommentare zu diesen Handbüchern

Keine Kommentare

Invacare 1114831 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Kommunikation Invacare 1114831 herunter. Invacare 1114831 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: 1110266 | 1121271 |

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kommunikation Invacare 1114831